Fuser

Gizmos and shortcuts

Try every on-canvas handle in the Compositor, see each of its states, and look up every key and modifier.

Every tool in the Compositor draws its own handles on the canvas: bounds around a layer, points along a path, a frame around a crop. They share one look, so once you know one you can read them all. Points are light and turn the accent color when selected, the handle you're dragging is the only one in the accent, and a small pill shows the exact value while you drag.

The demos below are live: drag them as you would on the canvas. Keys are shown with Mac symbols; on Windows and Linux, ⌘ is Ctrl and ⌥ is Alt.

Transform

With the Select tool (V), a selected layer gets the transform gizmo: drag the layer to move it, drag its corners and edges to resize it, and drag just outside a corner to rotate it.

320 × 200Keeps aspect ratio
Hold ⇧ ⌥ ⌘ while you drag, or toggle them here.

How to use

  • Move: drag the layer. It snaps to the canvas center, other layers and the canvas edges, and a red guide shows what it lined up with. Hold ⇧ to lock the move to horizontal, vertical or 45°, or ⌘ to move without snapping.
  • Copy: hold ⌥ as you start a move to drag a copy; the original stays where it was.
  • Resize: drag a corner, or an edge capsule to move one side. Images, video, 3D and raster layers keep their ratio and ⇧ frees it; on shapes, paths and text ⇧ keeps it. Hold ⌥ to resize from the center.
  • Rotate: drag just outside a corner, where the pointer turns into a curved arrow. Hold ⇧ for 15° steps, ⌘ to turn slowly for fine angles, or ⌥ to turn about the opposite corner.
  • Pivot: drag the crosshair chip to rotate around another point. It snaps to the corners, edge midpoints and center; double-click it to put it back in the center.
  • Several layers: ⇧-click layers, or drag a box on empty canvas. The box around them scales them all from its corners: ⇧ keeps their ratios and ⌥ scales from the center.
  • Groups: a group resizes from its corners only and keeps its ratio.

Anatomy

Idle selectionA hairline outline with round corner chips and edge capsules. Rotation zones sit just outside the corners.
Handle hoverThe handle under the pointer grows and takes an accent ring.
Corner resizeThe held corner fills with the accent and the rest fade; the W×H pill shows on every layer kind.
Edge resizeAn edge capsule moves one side only. It widens and fills while held.
Rotation zone hoverJust outside each corner the pointer becomes a curved arrow; drag there to rotate. The dashed ring only marks the zone here.
RotatingAn angle pill at the pointer and the pivot chip at the center of the turn; the other handles fade.
Pivot pointA crosshair chip marks what the layer turns around; drag it off center to rotate around another spot.
Size pill everywhereThe same size pill on shapes, images, text and groups.

Layer kinds

Some layer kinds change what the gizmo can do.

Keeps aspectImages, video, 3D and raster keep their ratio; a link glyph on the size pill says so, and breaks while ⇧ frees it.
Raster: no resizingResize handles are hidden; a raster layer can be moved and turned, but not resized.
GroupThe edge handles are hidden: a group scales from its corners and rotates.
Locked layerThe outline stays with a lock badge and no handles.
Multi-selectOne dashed box around the selection, with corner handles that scale every selected layer together, plus an outline on each layer.
Rotated layerThe outline, chips and capsules follow the layer’s angle and stay on its real corners and edges.
FlippedDragging an edge past the opposite one mirrors the layer, and a flip glyph on the size pill says so.
Very small layerOn tiny layers the edge capsules drop and the corner chips move outward.

Moving

Move with the Δ pillA pill shows how far the layer has moved while the handles fade.
⇧ locks the axis⇧ locks the move to horizontal, vertical or 45°, along a dashed guide through where the layer started.
⌥ duplicates⌥ at pointer-down drags a copy: the original stays drawn in place and the cursor gets a plus.
⌘ turns snapping offHolding ⌘ moves without snapping. Nearby snap guides gray out instead of vanishing, so you can see snapping is off.

Resizing

A layer's own ratio rule decides what ⇧ does: it frees a kept ratio and keeps a free one.

Free cornerA corner changes width and height independently. ⌘ turns snapping off, as when moving.
⇧ keeps the ratio⇧ keeps the ratio while you drag a corner, and a link glyph shows on the size pill.
⌥ resizes from the center⌥ resizes from the center: opposite sides move together.
Kept ratio, ⇧ frees itImage, video, 3D and raster keep their ratio; holding ⇧ frees it. ⇧ does the opposite on other layers.

Rotating

⇧ turns in 15° steps⇧ turns in 15° steps, on a ring of ticks around the pivot with the current step lit. ⌥ turns about the opposite corner.
⌘ turns finely⌘ slows the turn to a quarter of the pointer’s speed for fine angles.
Rotate a groupA group turns as one. Its gizmo keeps corners and rotation only.

Hover and selection

What the pointer previews before a click, and which layer a click picks.

Hover outline, shapesWith the select tool, hovering an unselected layer draws its bounds dashed (ellipses get a dashed ellipse) and a chip with its type and name.
Hover outline, pathPath layers hover with their real outline instead of a box, plus the same name chip.
⌘ previews the deepest layerHolding ⌘ targets the deepest layer under the pointer, drawn with a thin solid outline.
Click levels in a groupClick picks the outer group, double-click goes one level in, ⌘-click goes straight to the layer; a breadcrumb chip shows the level.
Layer marqueeDrag on empty canvas to box-select layers; anything touched lights up before you let go.

Snapping

Snapping shows what snapped, to what, and by how much.

Edge snap guideEdges and centers snap to other layers and to the canvas; a dashed red line runs across the whole canvas.
Canvas centerSnapping to the canvas center gets its own crosshair.
Distance labelsA red pill on the gap gives the distance in pixels between the dragged layer and its neighbor.
Equal spacingWhen gaps match, each gets the same red marker and number, so even spacing is visible.
Grid snapWith the grid on, the layer snaps to it; a red mark shows the corner that locked.
Snap target highlightThe edge being snapped to lights red on the target layer, so you know which layer it lined up with.

Curve editing

Curve editing works on the points and handles of a path. Double-click a path layer, or select it and press Enter, to edit it.

Select⇧ click adds to the selectionClick a segment adds a point

How to use

  • Select points: click a point, or ⇧-click to add it to the selection or take it out. Drag on empty canvas to draw a marquee, or ⌥-drag (or hold Q) for a lasso.
  • Drag a point to move it. Hold ⇧ to keep it horizontal, vertical or at 45°, ⌥ to move a copy, or ⌘ to turn snapping off.
  • Drag a handle to shape the curve. Hold ⇧ to keep its angle or snap to 45°, ⌥ to break the pair and make the point a corner, or ⌘ for fine control.
  • Click a segment to add a point there. ⌘-drag a segment to bend it.
  • ⌘-drag a point that has no handles to pull out a smooth pair.
  • C, or ⌥-click a point, switches it between smooth and corner. ⇧ C cycles all four point types. ⌥-click a handle to retract it.
  • Tab moves the selection to the next point along the path, ⇧ Tab to the previous one. ⌘ A selects every point.
  • Arrow keys nudge the selected points 1 px, or 10 px with ⇧.
  • Delete removes the selected points and joins their neighbors. ⌥ Delete breaks the path there instead.
  • ⌘ K splits the path at the selected point. ⌘ J joins two selected end points, or closes an open path.
  • ⇧ R reverses the path's direction. ⇧ H evens out the curvature at the selected smooth points.
  • Esc clears the point selection, then leaves. Enter also leaves.

Point types

The shape of a point tells you how its handles behave.

SmoothCircle. Dragging one handle mirrors the other: same angle, same length.
AsymmetricHexagon. The handles stay in line but keep their own lengths.
CornerSquare. Each handle moves on its own; a zero-length handle is hidden.
AutoDiamond. Handles are computed from the neighbors and show as dotted ghosts.

Handle arms

The arms show whether a point's handles are linked before you drag one.

Mirrored armsOne continuous line through the anchor: move either knob and both move.
Angle-locked armsA continuous line with a tick at the anchor: the angle is shared, lengths are not.
Independent armsEach arm stops short of the anchor: nothing else moves when you drag it.
Computed armsDotted arms and hollow knobs: computed. Dragging one converts the point to asymmetric.

Points

IdleLight chip with a hairline, 8 px, constant on screen at any zoom.
HoverGrows to 11 px with an accent ring.
SelectedAccent fill, light ring; its handles show. The outer ring marks the primary point.
Multi-selectedThe last clicked is primary (outer ring); the rest are filled without it. Tab and arrows act on all.
X 412 Y 188
DraggingOther points drop to 35% while you drag; X and Y follow the pointer.
Snapped to a pointWithin 12 px of another layer’s point it snaps; a red ring and cross mark the target. Hold ⌘ to skip.
Locked layerPoints show but can’t be grabbed: dark chips and a lock.
EndpointsAn open path’s two ends wear a dashed ring.

Handles

Knob idleHollow dark knob on a 1 px accent arm, so it never reads as an anchor.
Knob hoverGrows and keeps its hollow center.
Handle selectedClick a knob to select the handle on its own; arrow keys nudge it. The knob fills.
46.6 -31°
Dragging a handleThe opposite knob follows (mirrored). The pill reads length and angle.
⌥
⌥: break the pair⌥-drag frees this handle: the point turns corner and the arms split at the anchor.
⌥-click a handleRetracts it to zero; the point becomes a corner.
⌘
⌘-drag from an anchorOn a point with no handles, ⌘-drag pulls out a mirrored pair and the point becomes smooth.
⇧64 0°
⇧: keep the angle⇧ snaps to 45° steps, or to the handle’s own line when nearer: drag along it and only the length changes.

The path

What the path shows: which part you're on, which way it runs and what a click will do.

Segment hoverThe segment under the pointer thickens, so you know which one a click or bend will touch.
Insert pointA dashed ghost marks the spot; click to add an asymmetric point there. Hidden within 64 px of a point.
⌘
⌘ bend a segmentDrag the segment itself; both ends become asymmetric.
Open pathStart and end rings, and an arrow at the start for the direction. Direction Arrows in the panel shows it on every subpath; Reverse does for 1.6 s.
Closed pathNo end rings; only the direction arrow at the first point.
Active subpathInsert, bend, split, reverse and C act on one subpath. The others dim so you can see which.
Tunni handlePanel toggle. A star where both handle rays meet; drag it to re-aim both handles, keeping their lengths.
Curvature combPanel toggle with a scale slider. The fins use the accent, one color throughout.

Selecting points

⇧
Click, ⇧-clickClick selects one point; ⇧-click adds or removes. The last clicked is primary.
MarqueeDrag on empty space. Points inside light up live, before you let go.
⇧
⇧-marqueeToggles what it covers: selected points inside drop out, the rest are added.
⌥
Lasso⌥-drag (or hold Q) on empty space draws a free-form lasso.
Tab
Tab to the next pointThe next point along the path gets a dashed ring before you press, so you know where Tab goes. ⇧Tab goes back.
⌘A
Select all⌘A selects every point of the layer; Escape clears the selection, then leaves.

Commands

C
C: smooth ↔ cornerAny rounded point becomes a corner; a corner becomes smooth, its out handle mirrored from the in handle.
⇧C
⇧C: cycle typesCorner → smooth → asymmetric → auto, then back to corner. The anchor’s shape shows the new type.
⌥
⌥-click: convertSame toggle as C on the point under the pointer. The cursor shows the convert glyph while ⌥ is held.
⌘K
⌘K: splitThe point splits into two ends, each its own point (the first stays selected). Drawn pulled apart here for clarity.
⌫
Delete a pointRemoves the point; its neighbors join, and a subpath left with one point goes. ⌥⌫ breaks the path there instead.
Points harmonized: 1
Harmonize⇧H. Changed points pulse once and the notice counts them; “Nothing to harmonize” when none qualify.
Path reversed
Reverse⇧R. The path flashes, the start moves to the other end and the arrow shows the new direction.
Points: 9 → 3
SimplifyA button in the panel. The removed points fade out and the notice gives the count before and after.

Modifiers and cursors

A held modifier shows beside the pointer, and the hint strip lists what each one does to the current drag.

⇧X 470 Y 188
⇧: lock axisA guide along the locked axis and a ghost where the point started; the held key rides the pointer.
⌘
⌘: no snappingSnap targets gray out instead of pulling the point, so you can see snapping is off.
⌥
Modifier on the pointerA small keycap follows the pointer while a modifier changes what the next drag does, even with the hint strip off.
⇧Keep angle⌥Break⌘Fine
Hint stripAbove the toolbar: what each modifier does to this drag (here, a handle), lit while held. Turn it on or off in the shortcut sheet (?).
Pointer cursorsFrom left: the arrow, then the pen nib with a glyph for what happens next: insert a point on a segment, move a point, or convert it with ⌥ held.

Pen

The pen draws a vector path point by point: click for corners, drag for curves. Press P to pick it. Before you click, the cursor shows what the next click will do.

Click to start a path.

How to use

  • Click to place a corner point. Drag more than 4 px to pull out mirrored handles and make a curve.
  • Hold ⇧ to snap a new point to 45° from the last one, or the handle you drag to 45° steps.
  • Hold ⌥ while you drag to move only the out handle. The point becomes a corner.
  • Hold Space while you drag to move the point instead of its handles, or ⌘ to move the handle at a quarter of the speed.
  • Click the first point to close the path. While you draw, click another open path's end to join the two.
  • With no path in progress, click an open path's end to keep drawing from it. Clicking its first point reverses the path first.
  • ↵ finishes the path and keeps the pen. Esc, or switching tools, finishes it and selects it.
  • ⌫ or ⌘ Z removes the last point. A path needs two points: finishing with one removes it.

Before the first click

What the pen shows when no path is in progress.

ReadyPress P for the pen. The cursor is the pen nib, and nothing on the canvas changes until you click.
Open paths show their endsEvery visible open path rings its two ends in the accent.
Continue from the endPoint at an open path’s last point and the nib shows a plus. Click to keep drawing from there.
Path reversed: continuing from its start
Continue from the startClick the first point instead and the path is reversed, so you draw on from its start. An arrow shows the new direction while a notice says so.

Placing points

Preview and rubber bandA dashed ring and dot sit under the pointer, and a dashed curve runs to it from the last point, bent by its out handle. The system cursor is hidden.
Click: corner pointA click places a corner point. If the last point has an out handle, the new point gets a dotted in handle square to it, so the segment curves.
Drag: pull handlesDrag more than 4 px to pull out mirrored handles. If the last point had no out handle, it gets one to match.
Auto handlesHandles the pen adds for you are dotted, so you can tell them from the ones you pulled.
Space
Space: move the pointHold Space while you drag to move the point instead of its handles. A dotted ring marks where it started.
⇧
Shift: 45°⇧ snaps a new point to 45° steps from the last one, and the handle you drag to 45° steps. A dashed guide runs along the angle.
⌥
Alt: break the handleHold ⌥ while you drag to move only the out handle. The in handle stays put and the point becomes a corner, its arms split at the anchor.
⌫⌘Z
Undo last point⌫ or ⌘Z removes the last point, and you carry on from the one before. Removing the only point removes the path.

Closing and joining

Near the first pointOnce there are two points, the first wears a dashed ring. Within 10 px it turns solid, the nib shows a ring, and a dashed curve previews the closing segment.
ClosedA click closes the path. The tool switches to Select with the path selected.
Join another pathWhile you draw, pointing at another path’s open end rings it. Click to join the two paths.
JoinedThe two become one path and the other layer is removed. The tool switches to Select with the joined path selected.

Finishing

↵
Enter: finish and keep the pen↵ ends the path and keeps the pen: its ends get rings, and the next click starts a new path.
Esc
Escape: finish and selectEsc ends the path and switches to Select with it selected. Switching to another tool also ends the path.
A path needs two points: discarded↵
Single point discardedFinishing a path that has only one point removes it, and a notice says so.
⇧45°⌥BreakSpaceMove⌘Fine
Pen hints light upWhile you drag, the hint strip lists ⇧, ⌥, Space and ⌘ (fine control). Each lights while you hold it.

Text

Text layers are edited in place, on the canvas. Double-click a text layer, or select it and press Enter, to type into it. The box outline stays while you type; the resize handles come back when you stop.

Light falls where the canvas leaves room for it.0 × 0
Double-click the text to edit it; Esc leaves. Out of editing, drag a side handle.

How to use

  • Double-click a text layer to edit it with the caret where you clicked. Select it and press Enter to edit it with all its text selected.
  • Esc, or a click anywhere else, stops editing.
  • Drag a side handle (out of editing) to set the box's width; the text wraps inside it. A box that grew with its text becomes fixed width and wraps. Hold ⌥ to resize from the center.
  • ⌥ ← and ⌥ → kern the character before the caret by 20 a press, or 100 with ⌘.
  • With the text tool (T), click empty canvas for a new text layer. It grows with what you type and starts wrapping once it reaches the canvas edge.

Starting to edit

Golden hour
Text tool hoverHovering a text layer with the text tool outlines it dashed in the accent, so you know a click edits it.
Click empty canvas: new textWith the text tool, a click on empty canvas creates an empty auto-width layer there and starts editing it.
Golden hour2×↵
Double-click or ↵ to editDouble-click puts the caret where you clicked; ↵ opens the layer with all its text selected. The outline stays; the resize and rotate handles and the size pill hide.
HeadlineCaptionFrom an inputFont loading
Can’t editText set by a connected input, or in a font that hasn’t loaded yet, can’t be edited in place; a badge under the layer says why.

Caret and selection

Golden hour
CaretAn accent I-beam with small caps, blinking every 530 ms and solid again on any change.
Golden hour
Selected rangeThe caret hides while a range is selected; the highlight is the accent at 30%, one color with the caret.
Golden hour↵
Select all with ↵↵ on a selected text layer opens it with every character selected, ready to retype.
Golden hour−20⌥←
Kerning ⌥← / ⌥→⌥← and ⌥→ kern the character before the caret by 20 a press (100 with ⌘): a bracket marks the gap and a pill shows the value.

Box modes

While you type, a chip under the box names its mode: Auto width, Fixed width, wraps or Fixed size.

Golden hourAuto width
Auto widthThe box grows with the text.
Golden hourover the bayFixed width, wraps
Fixed width, wrapsText wraps at the box’s own width; the chip names the mode while you type.
The longest headlineyou ever sawcanvasFixed width, wrapsReached the canvas edge: the text wraps now
Switched to wrappingText that grows to the canvas edge starts wrapping at the canvas width: the chip changes to Fixed width, wraps and a notice says so.
Light falls onthe harbour as+2 linesFixed size
OverflowA fixed-height box hides what doesn’t fit: the last visible line darkens toward the edge and a “+N lines” chip on the bottom edge counts the rest.

Leaving

Golden houresc
Esc or click awayEsc, or a click anywhere else, ends editing at once: the caret and any highlight go.
Golden hour131 × 32
Resize while not editingOut of editing, the transform handles and the size pill come back.

Crop

Crop picks which part of an image or video layer shows, without changing how big the image is on the canvas. Double-click an image or video layer, or select it and press Enter, to crop it.

920 × 660
Crop⌫ Reset
Drag a corner, an edge, or inside the frame.

How to use

  • Drag a corner or an edge to crop. The image stays where it is on the canvas, and the pill under the frame shows the crop's size in source pixels. A crop can't go below 10 pixels.
  • Drag inside the frame to slide the image under it. The frame stays where it is.
  • Hold ⇧ while you drag a corner to keep the crop's ratio, or ⌥ to resize about the center.
  • Delete or ⌫ resets the crop to the full image.
  • Click Done, press Enter or Esc, or double-click to finish. Your crop is kept either way.

The crop frame

IdleOutside the frame dims to 50% black. An accent outline, four corner chips and four edge capsules; the thirds grid stays hidden until you drag.
Handle hoverThe handle under the pointer grows and takes an accent ring; the cursor shows which way it resizes.
1620 × 1080
ResizingThe handle you hold fills with the accent and the others fade. The pill below the frame gives width × height in source pixels; the crop stops at 10 pixels.
1620 × 1080
Thirds while draggingThe rule-of-thirds grid shows only while you drag a handle or the image.

Shift, Alt and sliding

⇧1620 × 1080 · 3:2
Shift: keep the ratio⇧ on a corner keeps the ratio the crop had when you grabbed it: a dashed guide runs along the diagonal and the pill names the ratio.
⌥1620 × 1080
Alt: from the center⌥ resizes about the center: a center mark shows, and the opposite side moves with yours.
Slide the imageDrag inside the frame to slide the image under it; the frame and the layer stay where they are.

Around the frame

The hidden image, faintWhat the crop cuts away shows faintly outside the frame (for a video, the frame at the playhead), so you can see it before you widen the frame.
Rotated layerThe frame, chips and capsules turn with the layer, through its full transform, parent groups included; crop works on rotated and scaled layers.
⌫
Reset⌫ or Delete resets the crop to the full image: the frame springs from where it was (dashed) out to the edges. With reduced motion it jumps straight there.
Crop⌫ ResetDone ↵
Mode chipA chip above the frame says you are cropping and that ⌫ resets. Click Done, press ↵ or Esc, or double-click to finish; your crop is kept.

Ink and brushes

An ink stroke is a filled shape around a spine, with a width at each point. Double-click an ink layer, or select it and press Enter, to edit its strokes one at a time.

Drag a point or a width handle; click the spine to add a point.

How to use

  • Drag a point to move it. Hold ⇧ to keep it on an axis or 45°, or ⌘ to move it at a quarter of the speed.
  • Drag a width handle on the selected point to change the width there. ⌘ gives fine control, ⇧ changes every selected point, ⌥ the whole stroke.
  • Click the spine to add a point, and keep dragging to place it.
  • Double-click or ⌥-click a point, or press C, to switch it between smooth and corner.
  • Select points: ⇧-click adds a point to the selection or takes it out, ⌘A selects them all, and Tab steps along the stroke.
  • 1–9 set the selected points' opacity to 10–90%, 0 to 100%.
  • Arrow keys nudge the selected points 1 px, or 10 px with ⇧. With no point selected they move the whole stroke.
  • Delete removes the selected points, or the stroke when none is selected.
  • Esc deselects the points, then leaves. Enter or a click on empty canvas also leaves.

Editing a stroke

Stroke selectedThe stroke you edit shows its outline (dashed), its spine and its points.
Spine hoverOver the spine it thickens and the cursor shows a plus. Press to add a point there and drag it into place.
Smooth and corner pointsA circle is a smooth point, a square a corner. Points grow when you hover or select them.
Selected point, width handlesThe selected point has a width handle on each side, where the ink ends.
Width 18
Width dragDrag a handle across the spine to change the width at that point; a pill reads it. ⌘ gives fine control.
Width 22.5 · whole stroke
Whole strokeHold ⌥ to scale every point’s width with this one, or ⇧ for the selected points. A dot marks each width that changes.
Point opacity1–9 set the selected points’ opacity to 10–90%, 0 back to 100%. Here 6: the ink fades around the point, and an arc shows the value.
Other strokesHovering another stroke on the layer draws its thin outline; click it to edit that stroke instead.

Ink commands

Smooth ↔ corner⌥-click or double-click a point, or press C, to switch it between smooth and corner.
Axis lock and fine moves⇧ holds a point drag to an axis or 45°, with a guide through where the point started. ⌘ moves it at a quarter of the speed.
Delete⌫ removes the selected points (top), or the whole stroke when none is selected (bottom). What went shows in red and fades.
EscapeLeft to right: the first Esc clears the selected points, the second leaves ink editing. Enter, or a click on empty canvas, also leaves.

Brush and eraser

With the brush, eraser or ink tool, the ring is the cursor. It shows the size, hardness and opacity, and the eraser's restore mode.

Brush ringA ring at the brush size, filled with what one stroke paints across its width, in the brush color.
HardnessA dashed inner ring marks where the soft edge starts, and the fill fades past it. ⇧[ and ⇧] change hardness by 25%.
Opacity1–9 set the opacity to 10–90%, 0 to 100%. The fill follows it, so 40% looks like 40%.
Size 48 · Hardness 70%
Size[ and ] make the ring smaller or larger, about 15% a step. A pill reads the size and hardness for a moment.
Eraser ringThe eraser’s ring has no fill: a light ring with a soft shadow, so it reads on light and dark paint.
Eraser restoreOn an image layer, hold ⇧ to paint back what you erased. The ring turns dashed, with a plus beside it.

Ink tool

Drawing a new ink stroke, freehand or by clicking points.

FreehandDrag to draw. The ring is the cursor: the ink width, filled with what the stroke paints. Pen pressure can thin and fade the stroke.
Soft inkLower the ink’s hardness and the ring’s fill fades towards the rim, as the stroke will; the dashed ring marks where the fade starts.
Click-placingClick to place points, ⌥-click for a corner. A dashed line runs from the last point to the pointer. Enter, Esc or a double-click finishes.
Close near the first pointFrom three points on, a dashed ring marks the first one. Near it the ring turns solid: click to close the stroke.

Shape tool

The preview while you drag out a rectangle or ellipse, and what each modifier does to it.

Rectangle previewDragging draws the real fill and stroke with a dashed outline around them. ⌘ skips grid snapping.
120 × 70
Size readoutA pill reads width × height while you drag.
70 × 70 · 1:1
Square⇧ keeps it square (a circle for the ellipse), and the pill adds 1:1.
120 × 70
From the center⌥ draws out from where you pressed; a center mark shows that point.

3D mesh

Select a 3D layer and its gizmo appears on the canvas: one ring per axis, at most 110 px across and always inside the layer's frame. Scale and move handles appear when you bring the pointer to the center.

LocalGlobal
Bring the pointer to the center to scale or move. Press R twice to tumble.

How to use

  • Drag a ring to turn the mesh about that axis. Hold ⇧ to turn in 15° steps, or ⌘ to turn at a quarter of the speed.
  • Drag the thin outer circle to roll the mesh on screen. It shows when the rings are set to Local.
  • Drag inside the rings to tumble the mesh freely. Hold ⇧ to keep it horizontal or vertical.
  • Press R twice to tumble with no button held. Click or press Enter to keep it; press Esc or right-click to put it back.
  • Bring the pointer to the center and a scale stalk per axis and the move disc fade in. Drag a stalk to scale that axis, or hold ⇧ to scale all three. Drag the disc to move the layer; ⇧ locks the axis.
  • Local · Global, the chip in the frame's corner, sets the rings on the mesh's own axes or the world's. Scale always follows the mesh's own axes.
  • Double-click a ring to reset that axis, the roll circle to reset the rotation, or a stalk to reset its scale. Hold ⇧ to reset every axis. Double-click the move disc to center the layer on the canvas.
  • Drag a frame corner to resize the layer. It keeps its proportions unless you hold ⇧.
  • Press Esc to cancel any drag.

Hovering a handle shows a pill with what it does and its current value.

Shading and light

The 3D Mesh section of the properties panel sets how the mesh is shaded. Try it beside the preview:

3D Mesh
Shading
Environment
1.00
0°
Drag the preview to turn the mesh. The panel beside it is the 3D Mesh section of the properties panel.
  • Lit lights the mesh with an environment. Pick one of six skies, then set Light intensity and Light rotation to change how bright the light is and where it comes from. Sunset is a full HDR sky: it loads the first time you pick it, with a spinner on its tile. The other five skies are ready at once.
  • Matcap shades the mesh from one of eight material balls, such as clay, chrome or gold. They don't depend on any light.
  • Flat uses one light from the upper left and one tone per face, so you can read how the mesh is built.
  • Normals colors each face by the way it points: red for X, green for Y, blue for Z. Use it to spot flipped or broken faces.

Keys and modifiers

Press ? in the Compositor to see the keys for the mode you're in.

Editor

KeysAction
EscStep out: points, mode, tool, selection, then close
EnterStep in: edit the selected layer, or a group's children
DeleteDelete what's selected at the level you're in
Command or Control Z Command or Control Shift ZUndo, redo
Command or Control D Command or Control GDuplicate, group
Command or Control ] Command or Control [Bring forward, send backward (with Shift: to front, to back)
Command or Control Shift H Command or Control Shift LHide, lock
1–0Opacity 10–100% (of the layers, or the brush)
Shift 0 Shift 1 Shift 2Zoom to 100%, fit, the selection
SpaceHold and drag to pan
V H R O T P I B ETools
?This sheet
Command or Control SSave
Ctrl YRedo (Windows and Linux only)
Command or Control ASelect every layer beside the selection; in curves and ink, every point
Left arrow Right arrow Up arrow Down arrowNudge 1 px, with Shift 10 px (one grid step when snapping to the grid); points in curves and ink
TabNext layer beside the selection, with Shift the previous; in ink, the next point
Command or Control Shift GUngroup
Command or Control = Command or Control -Zoom in, zoom out
Command or Control 0Zoom to fit

While dragging

KeysAction
ShiftConstrain: axis or 45°, a handle's own angle, 15° rotation, flip the aspect lock
Option or AltFrom the centre; duplicate on move; break a handle
Command or ControlPrecise: no snapping, fine rotation and width
Command or ControlClick: select the layer under the pointer

Modifiers by drag

Drag⇧ Shift⌥ Option · Alt⌘ Cmd · Ctrl
Move a layerLock axisDuplicateNo snap
Resize a shape, path or textKeep ratioFrom centreNo snap
Resize an image, video, 3D or paint layerFree ratioFrom centreNo snap
Rotate a layer15° stepsAbout the opposite cornerFine
Draw a rectangle or ellipseSquareFrom centreNo snap
Drag a crop handleKeep ratioFrom centre—
Curves: drag a pointLock axisDuplicateNo snap
Curves: drag a handleKeep angle, or 45°Break symmetryFine
Pen: drag out a handle; Space move point45°Break handleFine
Ink: drag a pointLock axis—Fine
Ink: drag a width handleSelected pointsWhole strokeFine
3D: turn a ring or the roll circle15° steps—Fine
3D: drag the move discLock axis—Fine
3D: drag a scale stalkAll axes—Fine
3D: turn the trackball (drag it, or press R twice)Lock to H or V—Fine

Edit modes and tools

These keys apply while you edit a layer's points, crop or text, paint, place a pen path, or have a 3D layer selected.

ModeKeysAction
Brush[ ]Smaller, larger
Shift [ Shift ]Softer, harder
1–0Opacity 10–100%
CurvesC Option or AltConvert smooth ↔ corner (Alt-click a point)
Shift CCycle every point type
Option or AltClick a handle to retract it
Command or ControlDrag a point to pull out handles; drag a segment to bend it
Shift H Shift R Command or Control KHarmonize, reverse, split at point
TabNext point
Command or Control JJoin the two selected end points, or close an open path
Option or Alt DeleteDelete points and break the path there
Option or Alt Left arrow Option or Alt Right arrow Option or Alt Up arrow Option or Alt Down arrowNudge points, keeping the curve’s shape
Q Option or AltHold Q, or Alt, and drag on empty canvas to lasso points
InkOption or AltClick a point: smooth ↔ corner
1–0The selected point's opacity
Option or AltDrag a width handle: the whole stroke's width
CropDeleteReset to the full image
PenEnter EscFinish the path (and keep, or leave, the pen)
SpaceWhile dragging a handle: move the point
3D layerR RPress R twice to turn the trackball: click or Enter keeps it, Esc or right-click cancels
Shift Command or ControlDrag a ring: 15° steps, or a quarter of the speed
ShiftDrag a stalk: scale all three axes
ShiftDouble-click a ring, a stalk or the roll circle to reset it (with Shift, every axis); the move disc centres the layer
EscCancel the drag in progress
TextOption or Alt Left arrow Option or Alt Right arrowKern the character before the caret by 20, with Cmd or Ctrl by 100

Hints on screen

A strip above the toolbar lists the modifiers for the drag in progress and lights up the ones you're holding. Between drags it shows what the current mode offers. Turn it off from the shortcut list (?).

Free ratioFrom centreNo snap
Resizing an imageShift is held, so its hint lights up.
click Convertdrag Pull handlesDelete
Editing curvesBetween drags, the strip shows what the mode offers.

What's Next?

On this page